Flanges for FRP Piping
August 3, 2020
Bolting up to expansion joints with control rods.
Proco Series 240/242 IO&M Instructions
July 8, 2020
Proco Products, Inc. rubber expansion joints are flexible connectors fabricated of natural or synthetic elastomers & fabrics – and if necessary metallic reinforcements – to provide stress relief in piping systems due to thermal expansion/contraction, mechanical vibration and/or system movements. In this animation, we will cover the general practices for proper installation, operation and maintenance of the Proco Series 240/242 molded spherical type rubber expansion joints.
Proco ProFlex™ 711/731 Slope Bottomed Check Valves
July 17, 2019
The Proco ProFlex™ Series 711/731 Slope Bottomed Check Valves are engineered for installation on pre-existing pipe lines such as manholes, outfalls and vaults where the outfall invert of the pipe is close to the floor of the manhole or outfall. This video demonstrates the many features & benefits of this exciting new addition to the Check Valve line from Proco Products, Inc.
Proco Pen-Seal Installation Video
January 25, 2019
When you have piping that runs through walls, floors, tanks and/our vaults, the Pen-Seal design helps to assist in achieving an efficient, low-cost mechanical gas or watertight seal. This installation video helps demonstrate how to properly install Pen-Seals in your piping system.
Storm and Rainwater Solutions from Proco Products, Inc.
September 13, 2018
Proco ProFlex™ Check Valve Technical Demo
May 9, 2018
The Style 790 ProFlex™ In-line Check Valve is one of the lowest headloss valves on the market today. Watch this technical demonstration of this valve in action.
ACE ’15 – June 26th, 2015 | Anaheim, CA USA
June 26, 2015
A number of products are offered by Proco Products, Inc. Here, Waterworks Manager Cal Hayes, talks about the company’s many products including the Pipe Penetration Seal, Series 700 Check Valves and the new 260R Series.
8" ProFlex ® Check Valve Installation in Cadiz, Spain
8” ProFlex™ Rubber Duckbill Check Valves being installed on a manifold system in the town of Babarte in Cadiz, Spain. The scope of this job was to move the outlet of the Barbate WWTP so that it would not diffuse into a swimming area. A total of 4 ProFlex ® check valves were installed on this manifold helping to make the transfer away from a common area a success.